Showing 21–40 of 964 results

  • Rolex M136660 SUBMARINER GREEN WATER GHOST 40MM

    $685.00$1,165.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【submariner replica swiss】

    1⃣️ Equipped with 3235 stable movement!

    2⃣️The whole watch is 904L stainless steel strap!

    3⃣️The dial uses the market’s exclusive “pot lid literal” design without face feet

    4⃣️The only calendar font matching version, the follow-up 1-31 fonts are compared one by one between true and false!

    5⃣️The only pointer luminous/pin luminous, Swiss c1+c3 luminous powder!

    6⃣️Phase plated with ip platinum plating!

    7⃣️The ceramic black circle uses the exclusive v4 version

    8⃣️Warm and moist as jade luminous beads

  • Rolex M136660 SUBMARINER BLACK WATER GHOST 40MM

    $745.00$1,210.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【rolex submariner black】

    1⃣️ Equipped with 3235 stable movement!

    2⃣️The whole watch is 904L stainless steel strap!

    3⃣️The dial uses the market’s exclusive “pot lid literal” design without face feet

    4⃣️The only calendar font matching version, the follow-up 1-31 fonts are compared one by one between true and false!

    5⃣️The only pointer luminous/pin luminous, Swiss c1+c3 luminous powder!

    6⃣️Phase plated with ip platinum plating!

    7⃣️The ceramic black circle uses the exclusive v4 version

    8⃣️Warm and moist as jade luminous beads

  • Rolex M124300 Oyster Tiffany Blue 41MM

    $600.00$1,300.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【rolex oyster tiffany blue Perpetual Series 41MM】
    1. Equipped with Rolex’s new Swiss 3230 movement with the same function;

    2. Consistent with the original thickness 11mm: surface diameter 41mm;

    3. Grinding nails, fine and smooth without burrs;

    4. The top Swiss ice blue luminous coating, consistent with the original Rolex luminous;

    5. Super 904 steel material;

    6. Grade 9 hardness sapphire glass mirror surface, scratch-resistant and wear-resistant;

    7. Top-level workmanship, each strap fits perfectly with the lugs;

    8. There is no solder joint at the crown of the buckle, and it is integrally formed;

  • ROLEX JOURNAL M126300 41MM Jin black face log

    $690.00$1,120.00 41MM logs
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    datejust gold rolex Clean Factory Black Face 41mm
    1: Equipped with Dandong 3235 integrated movement, power for 72 hours

    2: The whole watch is 904L stainless steel strap and ip vacuum-plated platinum tooth ring

    3: The dial color is infinitely close to the original

    4: The only calendar font matching in the whole market, follow-up No. 1-31 one by one font comparison between true and false

    5: The only pointer luminous/word nail luminous same color Swiss c1+c3 luminous powder

    6: Word nails/crown nails, full platinum plating treatment
    Clean-datejust

  • Panerai PAM1118 44MM

    $795.00 44MM Select options This product has multiple variants. The options may be chosen on the product page

    【PAM1118 panerai quality 44MM】
    ️【Distinguishing point】The hour hand is adjusted independently, and the calendar is adjusted through the hour hand
    1. Diameter 44 mm

    ️2. The balance wheel of the movement is consistent with the genuine product, and more than 95% of the screw holes are close to the genuine product;

    ️️3. Equipped with a customized version of the P9001 self-winding movement;

    4. Double-sided anti-reflective convex 9-grade sapphire crystal glass mirror, scratch-resistant and wear-resistant;

    5. Different styles use different materials for the case (316L stainless steel, ceramics, NTPT);

    ️6. The chronograph bezel is deeply printed and polished smooth and delicate;

    7. Grinding lettering, scale, circular grinding and chamfering grinding process, so that the font scale on the dial is impeccably delicate, and it is still smooth and delicate under a magnifying glass;

    8. The joints of the strap and the lugs are seamless;

    9. It adopts Swiss top luminous material, which is extremely shining in the night, and has the title of LED in the watch;

    10. Different models use different materials (cowhide, natural rubber)

    11. Crown with roller safety bridge;

  • Panerai PAM1112 44MM

    $775.00 44MM
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【PAM1112 “PANERAI” 44MM】
    ️【Distinguishing point】The hour hand is adjusted independently, and the calendar is adjusted through the hour hand
    1. Diameter 44 mm

    ️2. The balance wheel of the movement is consistent with the genuine product, and more than 95% of the screw holes are close to the genuine product;

    ️️3. Equipped with a customized version of the P9001 self-winding movement;

    4. Double-sided anti-reflective convex 9-grade sapphire crystal glass mirror, scratch-resistant and wear-resistant;

    5. Different styles use different materials for the case (316L stainless steel, ceramics, NTPT);

    ️6. The chronograph bezel is deeply printed and polished smooth and delicate;

    7. Grinding lettering, scale, circular grinding and chamfering grinding process, so that the font scale on the dial is impeccably delicate, and it is still smooth and delicate under a magnifying glass;

    8. The joints of the strap and the lugs are seamless;

    9. It adopts Swiss top luminous material, which is extremely shining in the night, and has the title of LED in the watch;

    10. Different models use different materials (cowhide, natural rubber)

    11. Crown with roller safety bridge;

  • Audemars Piguet Royal Oak offshore 44mm 26400 White panda

    $965.00$1,370.00 Audemars Piguet Select options This product has multiple variants. The options may be chosen on the product page

    1. Mirror: imported sapphire glass mirror, coated with anti-glare mirror blue film, the mirror glass is very beautiful when viewed from any angle through the sun.

    2. Bezel: It is the same brushed texture as the original. The hexagonal screws of the bezel are on the same plane as the bezel, without protrusion or depression. To achieve this effect, the precision of the mold is very high! The bezel is cut very flat and has full gloss.

    3. Dial: With the classic gray-black grid pattern as the background color, the highlighted squares are very layered, the dial font is highly white, and no defects can be seen. The three small dials are highlighted on the gray-black dial with white scales, and the red hands of the two small dials are particularly colorful and eye-catching.

    The small seconds dial is at 12 o’clock, and a circular calendar window and multi-faceted concave lens decoration are set at 3 o’clock. The TPE enlargement effect is consistent with the original, and it contains a surface coating to achieve the effect of enlarging and clearing data; the calendar font is synchronized with the genuine.

    The six o’clock and nine o’clock positions are also chronograph dials. The center of all the time scales on the entire dial is filled with imported luminous materials, and the luminous effect is the same as the original. The top of the hands is decorated with red, and the shape of the other two hands is very neat and burr-free.

    4. Crown: Made of hexagonal ceramic material, the top is brushed and polished. On the left and right of the replica crown are the heads for controlling the start and stop of the timing and the reset of the timing. The heads are very prominent, making the whole watch look more domineering.

    The titanium back cover is polished very beautifully. In the middle is a sapphire glass mirror glass, which fits perfectly with the edge of the back cover and is very wear-resistant and clear. The font of the back cover is hand-carved with a new process, which is very delicate and detailed; the screws are also on the same plane as the back cover.

    5. Movement: It is more domineering against the background of the back cover, the gray-black automatic rotor is very layered, and the gemstones on the surface of the movement are added. The 7750 is modified into the 3126 twelve-digit small second movement, which has the same stable driving force as the original.

  • Audemars Piguet 41mm 26331 Blue-eyed panda

    $975.00$1,375.00 Audemars Piguet
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【audemars piguet royal oak 26331 Blue and White Steel 41MM】

    1. Self-developed 2385 movement with running seconds at 6 o’clock and date, and the calendar disk is floating;

    2. The difficulty of the sandwich case is that each octagonal edge line is on a parallel line, and each angle is built according to the original 1-1. The grooves of the eight screws on the bezel are all parallel to the edge of the octagonal bezel;

    3. Royal Oak “decreasing” chain link structure, the size of each link is different;

    4. The dial is decorated with the iconic “tapisserie” grid pattern, which is engraved on a lathe, polished and colored, baked, riveted with scales, and filled with luminous light;

    5. The diameter of the case is the same as the original version of 41 mm;

    6. The head of the strap is the same as the original, 5 pieces assembled, very difficult, the strap and the case are seamlessly connected in a staggered pattern;

    7. The thickness and curvature of the case are consistent with the original version;

    8. The clasp is the same as the original version, with a spring installed inside, and the font size and craftsmanship are the same as the original version;

    9. The side of the case is consistent with the original version, adding a QR code for anti-counterfeiting, and the bottom cover has a QR code for inspection;

    10. The shell body at the junction of the case and the strap is engraved with the same model number as the original version 126331;

    11. The inner shadow circle of the watch is engraved with the product serial number consistent with the warranty card, and it is consistent with the original product (one watch, one card, one code, never repeat);

    12. With a full set of original package configuration including (warranty card, instruction manual, model bar code consistent with the genuine product) the full set of packaging is consistent with the genuine product.

  • Audemars Piguet 41mm 26331 Gray face blue eye steel shell steel belt

    $975.00$1,380.00 Audemars Piguet Select options This product has multiple variants. The options may be chosen on the product page

    【26331 audemars piguet Blue Steel ROYAL OKA Series 41MM】

    1. Self-developed 2385 movement with running seconds at 6 o’clock and date, and the calendar disk is floating;

    2. The difficulty of the sandwich case is that each octagonal edge line is on a parallel line, and each angle is built according to the original 1-1. The grooves of the eight screws on the bezel are all parallel to the edge of the octagonal bezel;

    3. Royal Oak “decreasing” chain link structure, the size of each link is different;

    4. The dial is decorated with the iconic “tapisserie” grid pattern, which is engraved on a lathe, polished and colored, baked, riveted with scales, and filled with luminous light;

    5. The diameter of the case is the same as the original version of 41 mm;

    6. The head of the strap is the same as the original, 5 pieces assembled, very difficult, the strap and the case are seamlessly connected in a staggered pattern;

    7. The thickness and curvature of the case are consistent with the original version;

    8. The clasp is the same as the original version, with a spring installed inside, and the font size and craftsmanship are the same as the original version;

    9. The side of the case is consistent with the original version, adding a QR code for anti-counterfeiting, and the bottom cover has a QR code for inspection;

    10. The shell body at the junction of the case and the strap is engraved with the same model number as the original version 126331;

    11. The inner shadow circle of the watch is engraved with the product serial number consistent with the warranty card, and it is consistent with the original product (one watch, one card, one code, never repeat);

    12. With a full set of original package configuration including (warranty card, instruction manual, model bar code consistent with the genuine product) the full set of packaging is consistent with the genuine product.

  • Audemars Piguet 41mm 26331 Black-eyed panda

    $966.00$1,378.00 Audemars Piguet Select options This product has multiple variants. The options may be chosen on the product page

    【audemars piguet 26331 White Steel ROYAL OKA Series 41MM】

    1. Self-developed 2385 movement with running seconds at 6 o’clock and date, and the calendar disk is floating;

    2. The difficulty of the sandwich case is that each octagonal edge line is on a parallel line, and each angle is built according to the original 1-1. The grooves of the eight screws on the bezel are all parallel to the edge of the octagonal bezel;

    3. Royal Oak “decreasing” chain link structure, the size of each link is different;

    4. The dial is decorated with the iconic “tapisserie” grid pattern, which is engraved on a lathe, polished and colored, baked, riveted with scales, and filled with luminous light;

    5. The diameter of the case is the same as the original version of 41 mm;

    6. The head of the strap is the same as the original, 5 pieces assembled, very difficult, the strap and the case are seamlessly connected in a staggered pattern;

    7. The thickness and curvature of the case are consistent with the original version;

    8. The clasp is the same as the original version, with a spring installed inside, and the font size and craftsmanship are the same as the original version;

    9. The side of the case is consistent with the original version, adding a QR code for anti-counterfeiting, and the bottom cover has a QR code for inspection;

    10. The shell body at the junction of the case and the strap is engraved with the same model number as the original version 126331;

    11. The inner shadow circle of the watch is engraved with the product serial number consistent with the warranty card, and it is consistent with the original product (one watch, one card, one code, never repeat);

    12. With a full set of original package configuration including (warranty card, instruction manual, model bar code consistent with the genuine product) the full set of packaging is consistent with the genuine product.

  • Audemars Piguet 39MM 15202 Green surface steel shell steel belt

    $876.00$1,210.00 Audemars Piguet
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【audemars piguet 15202 39MM】

    1. The movement adopts the original Cal.2121 movement, which perfectly restores all the functions of the original version;

    2. The case and bezel are polished and polished with food-grade 316L stainless steel, and the octagonal bezel is perfectly restored;

    3. Royal Oak “decreasing” chain link structure, the size of each link is different;

    4. The dial is decorated with the iconic “tapisserie” grid pattern. After lathe engraving, polishing and coloring, baking, riveting scales, and luminous filling, each hexagonal screw is on the same plane as the watch frame, and the slightest highlight is not accepted with depressions;

    5. The diameter of the case is the same as the original version of 39 mm;

    6. The head of the strap is the same as the original, 5 pieces assembled, very difficult, the strap and the case are seamlessly connected in a staggered pattern;

    7. The thickness and curvature of the case are consistent with the original version;

    8. The clasp is the same as the original version, with a spring installed inside, and the font size and craftsmanship are the same as the original version;

    9. The side of the case is consistent with the original version, adding a QR code for anti-counterfeiting, and the bottom cover has a QR code for inspection;

    10. Double-sided 9-level hardness sapphire glass mirror, scratch-resistant and wear-resistant;

    11. The inner shadow circle of the watch is engraved with the product serial number consistent with the warranty card, and it is consistent with the original product (one watch, one card, one code, never repeat);

    12. With a full set of original package configuration including (warranty card, instruction manual, model bar code consistent with the genuine product) the full set of packaging is consistent with the genuine product.

  • Patek Philippe 5711 Nautilus 40mm white steel case

    $860.00$1,440.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【patek philippe nautilus 5711 white Steel 40MM】
    Patek Philippe 5711 Nautilus produced by WY-3K factory, upgrade the original version with noiseless lettering!

    1️. The upgraded movement is all finely engraved, clear and not worn, and the texture is the ultimate;

    ️2. Upgrade the automatic rotor, adopt Swiss ultra-precision bearings, and install the rotor with unprecedented technology in the industry to achieve 100% noise reduction;

    ️3. The original movement, no fake plate, no fake balance wheel, no fake ruby, WY-3k factory completely reproduced the 3.3mm out-of-print high-quality 324SC movement;

    ️4. The dial scale is upgraded with super bright luminous light, and the overall brightness is harmonious and consistent;

    ️5. The classic blue dial of Nautilus is currently improving the color consistent with the original product, killing all the dial details and workmanship in seconds;

    ️6. Each watch in the calendar window is horizontally aligned, and there is no oblique occlusion;

    ️7. Multiple adjustments to adjust the smoothness of the head adjustment gear, and debug to the best state, so that the upgraded version of the grenade adjusts the time and the hand feel of the chain is smooth;

    ️8. The thickness of the entire watch has been upgraded to 8.3 mm, which perfectly realizes the thinnest mechanical watch on the entire network, which is equivalent to the original thickness. Very comfortable to wear;

    ️9. Emphasize that the 324Sc movement adjusts the calendar clockwise, that is, adjusts the calendar from top to bottom. Note that the analysis is consistent with the genuine product;

    ️️10. When adjusting the time, pull the crown to the second gear. The big second hand does not stop. It is also consistent with the original.

  • IWC IW378001 Pilot Series 43MM

    $680.00$1,038.00 IWC
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【iwc pilot watches Black Ceramic Pilot Series TOP GUN MIRAMAR 43MM】

    1: The watch has a large case made of fine steel. The time, date, day of the week and chronograph functions are displayed on the round dial, which is covered by a sapphire glass mirror. Inside the case is an automatic mechanical movement with excellent performance. The watch uses a dark brown calfskin strap. The watch is sophisticated in design, elegant and outstanding.

    2: The crown and buttons are exquisitely polished and comfortable to the touch.
    3: The side of the watch case is equipped with a crown and two chronograph buttons. The top of the round crown is engraved with the brand name, and the sides are decorated with pits for easy grasping; while the two chronograph crowns are cylindrical with round and smooth surfaces. Comfortable to press.

    4: Calf leather strap is soft, tough and elegant in color
    5: The watch case is matched with a brown calfskin strap with beige stitching. The strap is soft and tough and has an elegant color. It is not only comfortable to wear, but also generous and decent, showing elegance and nobility.

    6: The case is beautifully shaped and polished. The case made of finely polished stainless steel has a beautiful shape and smooth lines, with a diameter of 43 mm and a thickness of 15 mm. The surface has been carefully brushed and polished, with rounded edges and corners, exuding a beautiful silver brilliance. The watch case is equipped with a soft iron inner shell, which can effectively protect the movement from the influence of external magnetic fields. The raised bezel adds a rough and tough temperament to the watch.

    7: The dial display is clear, the functions are rigorous and consistent, and the layout is rigorous and consistent. The outer edge of the dial uses large and clear scales and Arabic numerals, with hour and minute hands and chronograph seconds hands in the center; there are also small chronograph dials showing hours and minutes on the dial, as well as a small seconds dial and a day and date display window.

    The day of the week display and the date display are clear at a glance. Two side-by-side windows at three o’clock display the day of the week and the date respectively. Both are displayed in the form of black characters on a white background. The obvious color difference makes the display very clear and clear at a glance. The chronograph hour dial is exquisitely designed and beautifully decorated.

    Located at six o’clock on the dial is the chronograph hour dial. The dial is decorated with scroll patterns, with white scales and Arabic numerals on the outer edge, and a small white-coated hand in the center.

    The chronograph minute dial is decorated with a swirl pattern, and the display is clear. The chronograph minute dial located at the twelve o’clock position of the dial adopts the same design as the chronograph hour dial. The color difference between white and blue displays clearly and is easy to read; while the swirl pattern makes it easier to read. The dial looks more refined, and the small seconds dial is smart and delicate.

    Located at nine o’clock is the small seconds dial, which is decorated with a scroll pattern. The red-coated hands and white scales form a clear contrast with the blue dial surface.
    The lugs are exquisite and rounded.

    8: The image of the little prince is engraved on the bottom of the watch. The image of the little prince wearing a coat and carrying a sword is engraved on the bottom of the watch with exquisite patterns. Inside the case is the ETA7750 automatic mechanical movement, which can provide a 44-hour power reserve when fully wound. The case is well sealed and has a waterproof depth of 60 meters.

  • Cartier Blue Balloon White surface steel shell steel belt 42MM

    $590.00$915.00 BLUE BALLOON 42MM SERIES
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【blue balloon cartier white 42MM】

    1. Five-layer fisheye, raised sapphire glass mirror;

    2. Solid central axis, standard strength;

    3. Hardened steel blue gradient pointer, the craftsmanship is strict, the pointer is black blue when viewed from the front, and bright blue when viewed from the side;

    4. The sun pattern in the center of the dial is clear, and the LOGO and fonts are printed on the wavy dial without font faults;

    5. The bottom of the calendar is a silver-gray frosted plate with fine frosted particles;

    6. The Roman scale of the hour hand is a three-dimensional printing effect, and it has a raised visual effect when viewed from the side;

    7. Put the head in the center, located in the center of the entire watch case, if it is above or below, it is unqualified workmanship;

    8. Spinel is a natural sapphire, which shows a pink visual effect under the irradiation of purple light;

    [Movement] Equipped with 2824 modified 6T51 movement machinery, the automatic hammer engraves the original LOGO and Geneva wash pattern;

    [diameter] the surface diameter is 42mm and the thickness is 13mm;

    [Case] Made of food-grade 316L stainless steel, post-processed and polished to make it feel more comfortable;

    [Strap] Belt/steel belt, buckle steel belt 316L stainless steel Lassa polished, Italian imported cowhide! The steel strap is paired with a double-press buckle of the same level.

  • Omega 9900 SPEEDMASTER RACING TIMING SERIES PANDA DISC 44.25MM

    $640.00$910.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【omega speedmaster Racing chronograph 44.25MM】
    【1】The surface diameter is: 44.25mm, consistent with the original version;

    【2】Transparent arc-shaped sapphire crystal glass mirror;

    【3】The font is clear and three-dimensional;

    [4] Self-developed 9900 movement, the 3 o’clock position is [12 hours], and the 9 o’clock position is [60 minutes] counter;

    【5】The bottom glass is sapphire glass;

    【6】The steel is made of imported AISI316L special steel with hardening treatment, so the hardness reaches 240HV;

    [Technical Difficulties] The diameter of the watch is accurate to 44.25 mm, the polished stainless steel case, the matte polished ceramic bezel, and the tachymeter scale with the Speedmaster series logo on the ceramic bezel;

    [Exquisite workmanship] The matte stainless steel dial is matched with platinum-plated nails, and the luminous is made of imported super luminous powder;

    [Essence] With stainless steel strap and imported cowhide leather strap, the strap and ceramic ring can be interchanged with the original version;

    [Exquisite workmanship] The steel belt, belt and lugs are tightly stitched, and the workmanship is first-class.

  • Rolex M326934 Sky-walker Brown Plate Rose Gold Case 42MM

    $690.00$1,190.00 Men's Watches
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【rolex sky dweller 42mm】
    1. Equipped with Rolex’s new 9001 movement with the same function;

    2. Realize date display, month display, annual calendar display, and dual time zones;

    3. Radiant sun texture, 12 small windows with red dots on the scale to display the month, polished nails, fine

    Greasy and smooth without burrs;
    4. The top Swiss ice blue luminous coating, consistent with the original Rolex luminous;

    5. Oyster steel forged steel watch case, 904L stainless steel, three rows of links, Oyster discount with 5 mm easy-to-adjust link extension
    exhibition system;

    The sapphire glass with grade 6 and grade 9 hardness is the same as the original, scratch-resistant and wear-resistant. This superalloy is widely used in high-tech, aviation and chemical industries.
    Work, with high corrosion resistance;

    7. Top-level workmanship, each strap fits perfectly with the lugs;

    8. There is no solder joint at the crown of the buckle, and it is integrally formed;

    9. The bezel adopts the triangular pit pattern of Rolex Ring Command, and the month function can be adjusted by rotating the outer ring.

  • ROLEX M126900 Air King Green Circle Black Disk 40MM

    $525.00$870.00 41MM logs
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    [rolex sky dweller black 40MM]
    1. Equipped with Rolex’s new 2836 movement with the same function;

    2. Consistent with the original thickness 13mm: surface diameter 40mm;

    3. The iconic lightning-shaped second hand, polished nails, delicate and smooth without burrs;

    4. The top Swiss ice blue luminous coating, consistent with the original Rolex luminous;

    5. Oyster steel forged steel watch case, 904L stainless steel;

    6. The green sapphire glass with grade 9 hardness is consistent with the original one, scratch-resistant and wear-resistant. This superalloy is widely used in high-tech, aviation and chemical industry, and has high corrosion resistance;

    7. Top-level workmanship, each strap fits perfectly with the lugs;

    8. There is no solder joint at the crown of the buckle, and it is integrally formed;

  • Rolex Daytona M116500ln Panda Di 40mm

    $740.00$1,310.00 Daytona Select options This product has multiple variants. The options may be chosen on the product page

    【daytona rolex panda】

    1.The thickness is 12.4mm consistent with the original product;

    2.Adopt 4130 integrated movement, the quality is comparable to genuine products;

    3.The steel belt case is made of 904L stainless steel imported from Germany;

    4.The case is processed with the latest version (original 2022), and the size of the polished bright surface of the bottom cover and the radian of the tooth edge are updated. ;

    5.The tape buckle adopts the same folding buckle as the original one;

    6.The watch hands adopt Buff factory hands, three small second hands and large second hands are all customized according to a single piece and have a solid needle case,
    The needle cap is in the shape of a mushroom head;

    7.C ceramic ring is used, and the platinum-plated film characters remain unchanged;

    8.The scale word nails are carved independently by CNC, and the edges of each grain are hand-polished. Luminous use of Swiss luminous powder and positive
    No color difference;

    9.The protruding height of the glass is the same as the original 2022 version, using fully transparent sapphire, with a small R edge for vision.

  • Rolex 116503 Daytona 40MM between white noodles

    $775.00$1,435.00 Daytona Select options This product has multiple variants. The options may be chosen on the product page

    【rolex daytona panda 116500ln】

    1.The thickness is 12.4mm consistent with the original product;

    2.Adopt 4130 integrated movement, the quality is comparable to genuine products;

    3.The steel belt case is made of 904L stainless steel imported from Germany;

    4.The case is processed with the latest version (original 2022), and the size of the polished bright surface of the bottom cover and the radian of the tooth edge are updated. ;

    5.The tape buckle adopts the same folding buckle as the original one;

    6.The watch hands adopt Buff factory hands, three small second hands and large second hands are all customized according to a single piece and have a solid needle case,
    The needle cap is in the shape of a mushroom head;

    7.C ceramic ring is used, and the platinum-plated film characters remain unchanged;

    8.The scale word nails are carved independently by CNC, and the edges of each grain are hand-polished. Luminous use of Swiss luminous powder and positive
    No color difference;

    9.The protruding height of the glass is the same as the original 2022 version, using fully transparent sapphire, with a small R edge for vision.

  • Audemars Piguet 39MM 15202 gold gradient black

    $885.00$1,215.00 Audemars Piguet
    Rated 0 out of 5
    Select options This product has multiple variants. The options may be chosen on the product page

    【15202 audemars 39MM】

    1. The movement adopts the original Cal.2121 movement, which perfectly restores all the functions of the original version;

    2. The case and bezel are polished and polished with food-grade 316L stainless steel, and the octagonal bezel is perfectly restored;

    3. Royal Oak “decreasing” chain link structure, the size of each link is different;

    4. The dial is decorated with the iconic “tapisserie” grid pattern. After lathe engraving, polishing and coloring, baking, riveting scales, and luminous filling, each hexagonal screw is on the same plane as the watch frame, and the slightest highlight is not accepted with depressions;

    5. The diameter of the case is the same as the original version of 39 mm;

    6. The head of the strap is the same as the original, 5 pieces assembled, very difficult, the strap and the case are seamlessly connected in a staggered pattern;

    7. The thickness and curvature of the case are consistent with the original version;

    8. The clasp is the same as the original version, with a spring installed inside, and the font size and craftsmanship are the same as the original version;

    9. The side of the case is consistent with the original version, adding a QR code for anti-counterfeiting, and the bottom cover has a QR code for inspection;

    10. Double-sided 9-level hardness sapphire glass mirror, scratch-resistant and wear-resistant;

    11. The inner shadow circle of the watch is engraved with the product serial number consistent with the warranty card, and it is consistent with the original product (one watch, one card, one code, never repeat);

    12. With a full set of original package configuration including (warranty card, instruction manual, model bar code consistent with the genuine product) the full set of packaging is consistent with the genuine product.

Shopping Cart
error: Content is protected !!